STRETCH CEILINGS APPLICATION
2. Profiles for stretch ceiling are attached to walls or ceilings.
3. Membrane is attached to profiles.
4. Membrane is stretched till it becomes flat surface.
LIGHT FIXTURES INSTALLATION
1. JBOX in ceilings
2. JBOX extension and wall profiles are mounted
3. Membrane is attached to profiles
4. PVC ring is attached
5. Hole is cut out in membrane
6. Lighting fixture is connected to JBOX
7. Lighting fixture is mounted.
8. Finished work
Installation of stretch ceilings or decorative wall panels is a straightforward procedure.
Wall, ceiling, roof, and electrical wiring system construction have to be completed before installation. Furniture does not need to be removed and post-installation cleaning is not required, as adhesive materials, cement, or paint are not used to install stretch ceilings.
Electrical wiring has to be installed prior to stretch ceiling installation.
Other than that, no preparation is required. It is possible that some pieces of furniture might have to be moved slightly to gain an easier access to ceilings but no pieces of furniture have to be removed completely, since access is only required around the perimeter of the room.
We recommend that specific sentimental or hard-to-replace items are removed as a precautionary measure
For perfect stretch ceiling flatness, horizontal lines are made using self-leveling lasers and then profiles are attached either to the wall or ceiling around the perimeter.
The tracks are cut at exact dimensions and then are screwed or stapled to walls or ceilings. If profiles are attached to ceilings, a frame or a rigid structure has to be available to fasten the parts.
All lamps and smoke detectors are marked and appropriate platforms are installed. Other types of fixtures should be applied before the final installation of the stretch ceiling membrane.
Once this phase is completed, thorough security and conformity checks are performed.
Stretch ceiling installation
Stretch ceiling membrane has to be unpacked carefully. Lacquered stretch ceilings are protected with polyethylene wrapping foam from dust and accidental damage.
We recommend all cold air sources of the room are limited during installation process. Stretch ceiling membrane is heated up to 40 °C (105 °F) using a special device and then clamped at strategic spots on a profile using special clamps. Stretch ceiling membrane usually extends by 5 %, ensuring that stretch ceilings will not sag.
Afterwards, a harpoon is safely fastened and then the stretch ceiling membrane simply has to gradually cool down. The room should remain closed until stretch ceiling membrane cools up to a room temperature.
stretch ceiling price
Openings for lamp, smoke detector and other object installation are cut out of the stretch ceilings and then reinforcing rings are inserted.